威尼斯432888can(值得再来)有限公司

Hello, welcome to Refuta Refractories Co.,Ltd!

中文English

  • Share to:

Contact us

Contact us
  • Tel:+86-519-86571068
  • +86-519-87882288
  • Customer service:
    +86-519-86571068ext8202
  • Fax:+86-519-86579566
  • +86-519-87885688
  • Postcode:213314
  • E-mail:infor@refuta.com
  • Web:www.refuta.com
location:Home > PRODUCTS

PRODUCTS

Refractory Catalogue for Aluminum Industry

image


  RFTC AL Series:RFTC AL Series is specially designed for molten aluminum contact areas including hearth, furnace sidewalls, sills, ramps, ladles and degas boxed. It can significantly reduce molten penetration and co-rundum grouth. And it has passed the Alcoa test.


  RFTC LC and CF Series:RFTC LC and CF Series are ultra-low cement and self-flow castable with high fluidity allowing installation in the intricate shapes with minimal vibration. They exhibit ultra high strength, low porosity and excellent abrasion, and especially they have good thermal shock resistance. Thus, they are designed specifically for feeding tower, burner and sills.


  RFTC MD Series:RFTC MD Series is high alumina castable with excellent working properties, high strength and good abrasion resistance. It is specifically designed for roof and upper.


  LWI Series:LWI Series is light weight and insulating castable. Refuta can provide insulating castable with bulk density ranging from 700 to 1500 kg/m3.

  

      RFTC GV Series:RFTC GV Series is a fused silica based castable which provide optimal surface and is non-wetting to aluminum alloys. It is developed for molten metal transfer applications such as troughs and filter boxes.


20100115185555-140525143


Refractory Catalogue for Ferrous Metal Casting

image


  RSCOIL-GROUT:This material series is applied over induction coils for electrically insulation and coil protection from metal and penetration, and then the transverse cracks of the work lining could be reduced, which isspecially suit for the furnaces of less than 20 tons.


  RSCOIL-CAST:This material seriesis suit for the furnaces of more than 20 tons.


  RSDRY-RAM:This materialseries is applied as all kinds of induction furnace work lining used tomelt and holdthe grey &nodular iron,carbon steel, stainless steel, high-alloysteel, all kinds of copper alloy and all series Al alloys. Completely drying can keep loose layer thickness.


  RSLOW-CAST:This material series is applied as the work ling of the ladles, channel furnace for holding grey & nodular iron, PPF and all kinds of launders. These products can offer high thermal stability and strength with long lining life.


  RSPLASTIC:This material seriesis used to repair all kinds of induction furnace lining, ladles and launders due to the high workability.


20100115185555-140525143

image


image